Fuels & Additives

Slicker Oil Additive
   Misty/Slicker 50-K is an oil additive that puts an anti-friction coating on the moving parts of your engines, drastically increasing performance and increasing wear protection. Measurable gains in lap times expected. Note: Do not mix with oil. Put oil in crankcase as usual less 1 ounce, then pour 1/2 to 1 ounce of Slicker on top. Use once every 3-4 oil changes for maximum performance. Do not use too much. Misty/Slicker should not be used with Super Green, as it may cause additive conflicts.

Methanol
The purest, clean-burning, virgin methanol fuel for use in 2 or 4-cycle racing engines. We get tank truck loads fresh, usually every couple of weeks (typical purity=99.984%). We use only primary source, racing-class, top-grade methanol, not a secondary source by-product. This is the best, highest-grade racing fuel that you can get. In addition, we use state-of-the-art storage, drying, and filtering systems. Use only the best in your engine for maximum performance. Buy in drum-quantity loads for the best pricing. Methanol is also being considered as an alternative, eco-friendly fuel for use in DMFC's - Direct Methanol Fuel Cells, the power source of the future. Pure Methanol can ship by UPS in quarts, or by motorfreight for gallons or drums.  However, the most economical is direct pickup in plastic drums.

NitoMethane/NitroEthane
These high power HP booster fuel additives will significantly boost your performance. Nitromethane for methanol engines, nitroethane for gas engines. We use the clear (water-test passing) type. Use in low compression (9:1 or less) engines only. Nitromethane is the same fuel used by top-fuel dragsters which break 300mph! Pure Nitro now ships by motorfreight only to a commercial address. See the pre-mixed fuels for UPS shipments. Get up and go for the Outlaws! 

Propylene Oxide
This low-end power booster (igniter) helps rich fuel burn faster and gives more torque. You will see a performance increase, especially coming out of the corners and off the starting line. Clear type passes methanol-water test. For use with methanol or gas engines up to 16:1 compression. Mix at about 10%-15% of your fuel mixture. Pure PropyleneOxide now ships by motorfreight only to a commercial address. See the pre-mixed fuels for UPS shipments. Get up and go for the Outlaws!

Pre-mixed FHS Racing Fuel
Due to stricter HazMat regulations, we are now shipping UPS HazMat items in the safer form of ORMD pre-mixed fuels in quart bottles. A typical blend is 10%Nitromethane, 10%PropyleneOxide, 80%Methanol, but we can make almost any mixture you like. We can also put in synthetic oils as top lube. If you want the pure chemicals, we can still ship them by motorfreight to a commercial address. Get up and go for the Outlaws!.

Dye
We can provide dye which is compatible for your fuels and oils.  FHS usually stocks red, blue, green and purple dye.

Fragrance
If you do not like the smell of certain additives you can add compatible frangrances to your oil and fuel.  FHS provides special mint, lemon, strawberry and tropical smells to your choice which you can safely use in your oil and fuel without being worried to change the characteristics of them..