Red Max Model Fuels – Material Safety Data Sheet
Section 1: Chemical Product and Company Identification
FHS Supply, Inc.
244 Bethel Hill Rd
Clover, SC 29710
Product Name: Red Max Model Fuel
NA# / UN#: 1993
CAS#: Not available
RTECS: PC100000, PA9800000, TZ2975000, FI400000
TSCA: Not Available
CI#: Not applicable
Synonym: Red Max Fuel, RM Fuel, Model Fuel
Chemical Name: Red Max Model Fuel
Chemical Formula: CH40, CH3NO2, C3H6O, N/A
Section 2: Composition and Information on Ingredients
Name: CAS# % by Weight
Methyl alcohol 67-56-1 10.0 to 99.8
Nitromethane 75-52-5 0.0 to 80.00
Propylene Oxide 75-56-9 0.0 to 10.00
FHS Synthetic Oil N/A 0.0 to 25.00
Castor Oil 8001-79-4 0.0 to 30.00
Toxicological Data on Ingredients: Red Max: ORAL (LD50): Acute: 930 to 5628 mg/kg [Rat]. IPR (LD50): Acute: 364 to 9540 mg/kg [Rat]. SCU (LC50): Acute: 9800 [Mouse]. Dermal (LD50): Acute 20 G/kg [Rabbit].
Section 3: Hazards Identification
Potential Acute Health Effects:
Skin: Skin contact (irritant), Slightly hazardous in case of skin contact (permeator). Causes moderate skin irritation. May be absorbed through the skin in harmful amounts. Prolonged and/or repeated contact may cause defatting of the skin and dermatitis
Eye: Eye contact (irritant). Produces irritation, characterized by a burning sensation, redness, tearing, inflammation, and possible corneal injury. May cause painful sensitization to light.
Ingestion: May be fatal or cause blindness if swallowed. May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause systemic toxicity with acidosis. May cause central nervous system depression, characterized by excitement, followed by headache, dizziness, drowsiness, and nausea. Advanced stages may cause collapse, unconsciousness, coma and possible death due to respiratory failure. May cause visual impairment and possible permanent blindness. May cause cardiopulmonary system effects.
Inhalation: Harmful if inhaled. May cause adverse central nervous system effects including headache, convulsions, and possible death. May cause visual impairment and possible permanent blindness. Causes irritation of the mucous membrane.
Potential Chronic Health Effects:
Slightly hazardous in case of skin contact (sensitizer). May damage kidney and/or liver.
CARCINOGENIC EFFECTS: Not available.
MUTAGENIC Effects: Mutagenic for mammalian somatic cells. Mutagenic for bacteria and/or yeast.
TERATOGENIC EFFECTS: Classified POSSIBLE for human. Chronic exposure may cause reproductive disorders and teratogenic effects
DEVELOPMENTAL TOXICITY: Not available.
Other Toxic Effects: The substance is toxic to eyes. Prolonged or repeated skin contact may cause dermatitis. Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion. The substance may be toxic to blood, kidneys, liver, brain, heart, peripheral nervous system, upper respiratory tract, skin, central nervous system (CNS), optic nerve. Repeated or prolonged exposure to the substance can produce target organs damage. Repeated exposure to a highly toxic material may produce general deterioration of health by an accumulation in one or many human organs.
Section 4: First Aid Measures
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keep eyelids open. Cold water may be used. Get medical attention.
In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical attention.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. WARNING: It may be hazardous to the person providing aid to give mouth-to-mouth resuscitation when the inhaled material is toxic, infectious or corrosive. Seek immediate medical attention.
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt, or waistband. Get medical attention immediately.
Serious Ingestion: Not available
Notes to Physician: Effects may be delayed. Ethanol may inhibit methanol metabolism.
Section 5: Fire and Explosion Data
Flammability of the Product: Flammable
Auto-Ignition Temperature: 464°C (867.2°F)
Flash Points: CLOSED CUP: 12°C (53.6°F). OPEN CUP: 16°C (60.8°F).
Flammable Limits: Lower: 6% Upper: 36.5%
Component Flammable Limits:
Nitromethane: Lower: 7.3% Upper: N/A
Propylene Oxide: Lower: 2.1% Upper: 37.0%
Methanol: Lower: 6% Upper: 36.5%
(Non-Volatile) Oil Lower: N/A Upper: N/A
Products of Combustion: These products are carbon oxides (CO, CO2), Formaldehyde, Nitrogen Oxides.
Fire Hazards in Presence of Various Substances:
Highly flammable in presence of open flames and sparks, of heat.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available. Explosive in presence of open flames and sparks, of heat. Containers can build up pressure if exposed to heat and/or fire.
Fire Fighting Media and Instructions:
Flammable liquid, soluble or dispersed in water.
SMALL FIRE: Use DRY chemical powder, ABC, CO2, alcohol-resistant foam.
LARGE FIRE: Use alcohol-resistant foam, water spray or fog. Cool containing vessels with water spray in order to prevent pressure build-up, auto-ignition or explosion. Do NOT use straight streams of water. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Special Remarks on Fire Hazards:
Explosive in the form of vapor when exposed to heat or flame. Vapor may travel considerable distance to source of ignition and flash back. Can release vapors that form explosive mixtures at temperatures above the flashpoint. When heated to decomposition, it emits acrid smoke and irritating fumes. Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. CAUTION: MAY BURN WITH NEAR INVISIBLE FLAME.
Special Remarks on Explosion Hazards:
Forms an Explosive mixture with air due to its low flash point. Explosive when mixed with Choroform+sodium methoxide and diethyl zinc. It boils violently and explodes.
Section 6: Accidental Release Measures
Dilute with water an mop up, or absorb with an inert dry material and place in an appropriate waste disposal container.
Flammable liquid. Poisonous liquid. Keep away from heat. Keep away from sources of ignition. Stop leak if without risk. Absorb with DRY earth, sand, vermiculite or other non-combustible material. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Call for assistance on disposal. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.
Section 7: Handling and Storage
Keep locked up. Keep away from heat. Keep away from sparks. Keep away from sources of ignition. Take precautionary measures against electrostatic discharges. Ground the container while dispensing. Ground all equipment containing material. Ground and bond containers, when transferring material. Use spark proof tools. Practice safe work place hygiene. Do not eat or drink near hazardous chemicals. Do not ingest. Do not breathe gas/fumes/vapor/spray. Avoid contact with skin and eyes. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Wash hands with soap and water after working with material. If ingested, seek medical advice immediately and show the container or the label. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep away from incompatibles such as oxidizing agents, metals, & acids.
Keep locked up. Keep away from heat. Keep away from sparks. Keep away from sources of ignition. Take precautionary measures against electrostatic discharges. Ground the container while dispensing. Ground all equipment containing material. Ground and bond containers, when transferring material. Use spark proof tools. Practice safe work place hygiene. Do not eat or drink near hazardous chemicals. Do not ingest. Do not breathe gas/fumes/vapor/spray. Avoid contact with skin and eyes. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Wash hands with soap and water after working with material. If ingested, seek medical advice immediately and show the container or the label. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Do not store in aluminum or lead containers. Do not store in containers made of brass or containers with brass fittings.
Section 8: Exposure Controls / Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value. Use explosion-proof ventilation equipment. Take precautionary measures against electrostatic discharges. Ground all equipment and containers of material. Ensure the eyewash stations and safety showers are proximal to the work-station location.
Splash goggles. Lab Coat. Vapor respirator. Boots. Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
TWA: 200 from OSHA (PEL) [United States] TWA: 200 STEL: 250 (ppm) from ACGIH (TLV) [United States]  STEL:250 from NIOSH [United States] TWA: 200 STEL: 250 (ppm) from NIOSH SKIN TWA: 200 STEL: 250 (ppm) [Canada] Consult local authorities for acceptable exposure limits.
Section 9: Physical and Chemical Properties
Physical state and appearance: Liquid
Odor: Alcohol like. Pungent when crude.
Taste: Not Available.
Molecular Weight: 0%Nitro Fuel = 32.04 g/mole to 65%Nitro Fuel = 50.89 g/mole
Color: Usually light red/ pink, however may be Clear or dyed blue, green, or purple,
pH: (1% soln/water): Not available
Boiling Point: 0%Nitro Fuel = 63.0°C (145.4°F) to 65%Nitro Fuel = 99°C (210.2°F)
Melting / Freezing Point: 0%Nitro Fuel = -97.8°C (-144°F) to 65%Nitro Fuel = -29°C (-20.2°F)
Critical Temperature: 240°C (464°F)
Autoignition Temperature: 65% Nitro Fuel= 418°C ( 784.4°F) to 0% Nitro Fuel = 464°C ( 867.20°F)
Flash Point: Closed Cup 0%Nitro Fuel 11°C (51.80°F) to 65% Nitro Fuel 33°C (91.4°F)
Open Cup 0% Nitro Fuel 15°C (59.0°F) to 65% Nitro Fuel 42°C (107.6°F)
Flammable Limits: Lower: 6.0 vol % Upper: 36.00 vol %
Specific Gravity: 0.7915 to 1.14 (Water=1)
Viscosity: 0.55 cP 20°C (68°F)
Vapor Pressure: 12.3 kPa (@ 20°C) (68°F)
Vapor Density: 1.11 to 2.0 (Air=1)
Volatility: Not available
Odor Threshold: 100 ppm
Water/Oil Dist. Coeff: The product is more soluble in water; Log(oil/water)=-0.8
Ionicity (in water): Non-ionic
Dispersion Properties: See solubility in water.
Solubility: Moderately soluble in cold water, hot water. Easily soluble in methanol
Section 10: Stability and Reactivity Data
Stability: The product is stable
Instability Temperature: Not available
Conditions of Instability: Heat, ignition sources, incompatible materials
Incompatibility with various substances: Reactive with oxidizing agents, metals, acids.
Corrosivity: Non-corrosive in presence of glass. Will corrode brass over time. May degrade certain plastics over time.
Special Remarks on Reactivity:
Can react vigorously with oxidizers. Violent reaction with alkyl aluminum salts, acetyl bromide, chloroform + sodium methoxide, chromic anhydride, cyanuirc chlorite, lead perchlorate, phosphorous trioxide, nitric acid. Exothermic reaction with sodium hydroxide + chloroform. Incompatible with beryllium dihydride , metals ( potassium and magnesium), oxidants ( barium perchlorate, bromine, sodium hypochlorite, chlorine, hydrogen peroxide), potassium tert-butoxide, carbon tetrachloride, alkali metals, metals ( aluminum, potassium magnesium, zinc), and dichlormethane. Rapid autocatalytic dissolution of aluminum, magnesium or zinc in 9:1 methanol + carbon tetrachloride – sufficiently vigorous to be rated as potentially hazardous. May attack brass and some plastics, rubber, and coatings.
Special Remarks on Corrosivity: Not available.
Polymerization: will not occur.
Section 11: Toxicological Information
Routes of Entry: Absorbed through skin. Eye contact. Inhalation. Ingestion.
Toxicity to Animals:
WARNING: THE LC50 VALUES HEREUNDER ARE ESTIMATED ON THE BASIS OF A 4-HOUR EXPOSURE. Acute oral toxicity (LD50): 940 to 5628 mg/kg [Rat]. Acute dermal toxicity (LD50): 15800 mg/kg [Rabbit]. Acute toxicity of the vapor (LC50): 64000 4 hours [Rat].
Chronic Effects on Humans:
CAS# 67-56-1: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Epidemiology: Methanol has been shown to produce fetotoxicity in the embryo or fetus of laboratory animals. Specific developmenta l abnormalities include cardiovascular, musculoskeletal, and urogenital systems.
Mutagenic Effects: Mutagenic for mammalian somatic cells. Mutagenic for bacterial and/or yeast.
TERATOGENIC Effects: Classified POSSIBLE for human.
Neurotoxicity: No information available.
Other Toxic Effects: Causes damage to the following organs: eyes. May cause damage to the following organs: blood, kidneys, liver, brain, peripheral nervous system, upper respiratory tract, skin, central nervous system (CNS), optic nerve.
Other Effects on Humans:
Hazardous in case of skin contact (irritant), of ingestion, of inhalation. Slightly hazardous in case of skin contact (permeator).
Special Remarks on Toxicity to Animals: Not available
Special Remarks on Toxicity to Humans:
Passes through the placental barrier. May affect genetic material. May cause birth defects and adverse reproductive effects (paternal and maternal effects and fetotoxicity) based on animal studies.
Section 12: Ecological Information
Ecotoxicity: Ecotoxicity in water (LC50): 29400 mg/l 96 hours [Fathead Minnow].
BOD5 and COD: Not available
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are less toxic than the products itself.
Special Remarks on the Products of Biodegradation:
Methanol in water is rapidly biodegraded and volatilized. Aquatic hydrolysis, oxidation, photolysis, adsorption to sediment, and bioconcentration are not significant fate processes. The half-life of methanol in surface weater ranges from 24 hrs to 168 hrs. Based on its vapor pressure, methanol exists almost entirely in the vapor phase in the ambient atmosphere. It is degraded by reaction with photochemically produced hydroxyl radicals and has an estimated half-life of 17.8 days. Methanol is physically removed from air by rain due to its solubility. Methanol can react with NO2 in polluted to form methyl nitrate. The half-life of methanol in air ranges from 71 hrs (3 days) to 713 hrs (29.7 days) based on photooxidation half-life in air.
Section 13: Disposal Considerations
Waste must be disposed of in accordance with federal, state, and local environmental control regulations.
Section 14: Transport Information
Proper Shipping Name: Red Max Model Fuel
US DOT Classification: CLASS 3: Flammable Liquid N.O.S. (contains Nitromethane, Methanol).
Packing Group: II
NA# / UN#: 1993
Proper Shipping Name: Methanol
IMO Classification: CLASS 3 (6.1): Flammable Liquid N.O.S. (contains Nitromethane, Methanol).
Packing Group: II
NA# / UN#: 1993
Reportable Quantity: Not applicable
North American Emergency Response Guide (EMR) Number: 128
Special Provisions for Transport: Not available.
Section 15: Other Regulatory Information
Federal and State Regulations: Not Available
CLASS B-2: Flammable liquid with a flash point lower than 37.8°C (100°F). CLASS D-1B: Material causing immediate and serious toxic effects (TOXIC). CLASS D-2A: Material causing other toxic effects (VERY TOXIC). Class D-2B: Material causing other toxic effects (TOXIC).
R11 – Highly flammable. R23/24/25- Toxic by inhalation, in contact with skin and if swallowed. R39- Danger of very serious irreversible effects. R39/23/24/25- Toxic: danger of very serious irreversible effect through inhalation, in contact with skin and if swallowed. S7- Keep container tightly closed. S16- Keep away from sources of ignition – No smoking. S36/37- Wear suitable protective clothing and gloves. S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Health Hazard: 2
Fire Hazard: 3
Personal Protection: h
National Fire Protection Association (U.S.A.)
Gloves. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.
Section 16: Other Information
-SAX, N.I. Dangerous Properties of Industrial Materials. Toronto, Van Nostrand Reinold, 6e ed. 1984. –Material safety data sheet emitted by: la Commission de la Sant Ã© et de la S Ã©curit Ã© du Travail du Qu Ã©bec. –Hawley, G.G. The Condensed Chemical Dictionaly, 11e ed.,New York NY., Van Nostrand Reinold, 1987. LOLI, HSDB, RTECS, HAZARDTEXT, REPROTOX databases
Other Special Considerations: Not available
Created: 11/07/2015 12:00 PM
Last Updated: 11/07/2015 12:00 PM
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall FHS Supply, Inc. be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if FHS Supply, Inc. has been advised of the possibility of such damages.
May be labeled as ORM-D : Consumer Commodity when inner packagings are quart bottles/cans in strong outer fiberboard boxes.
FHS recommends ground/ocean shipping of this material, although small quantities may ship by air when appropriately labeled and packaged.
FHS Supply, Inc., PO Box 9, Clover, SC 29710-0009
Emergency Contact: (803) 222-7488 or (803) 831-8307